Cookie Img Back to top
Home » Products » Metal Scrap Recycling Machine » Metal Chips Briquetting Press

Metal Chips Briquetting Press

Metal Chips Briquetting Press
Send Inquiry
Product Code : Y83
Price And Quantity
  • Minimum Order Quantity
  • 1
  • Unit of Measure
  • Set/Sets, ,
  • Price Range
  • 10000.00 - 1000000.00 USD ($)
  • Price
Product Description

The Metal Chips Briquetter is horizontal press widely used to compact chips material. It compress small particles material like metal turnings & swarfs without shredding. It can also compress all kinds of  aluminum, copper,brass, cast iron, mild steel etc  to high density metal blocks. It also helps for the reclamation of valuable coolant, reduces floor space, handling and transportation costs. Metal Chips Briquetter machine also can be used to compact wood chips and the almond hulls.

Why metal scrap should be briquette before remelting?

  • As there is too much oil or cooling liquid when metal scrap comes out, if it is put into furnace, smelting come out as black smoking and hence reduces the efficiency of the furnace as the scarp becomes fluffy.
  • After metal briquette machine compress less than 90% of oil or cooling liquid, will come out and therefore the the block density will be less than 5200 Kg/CBM.

Metal chips briquete press introduction:

  • Metal scrap briquetting press machine is compact and available in different kinds of chips like cast iron, copper, aluminum, magnesium, molybdenum, titanium etc. The metal crap chips into high density blocks without any supplement.
  • Metal scrap briquetting press machine is the fully hydraulic controlled equipment and the electric equipment main control part is outfitted with PLC control technology wherein the entire working process can realize the automatic operation, and reduce the labor intensity and labor.
  • The system is equipped with a manual work procedure, which is easy to realize the move forward and backward and is easily adjustable.
  • As per customer requirements, the automatic feeding can be increased, and the discharging device is adjusted to build automation metal scrap briquetting press line.

Anyang metal chips briquette machine design advantages:

  • The hydraulic system is fully equipped with two-ways cartridge valve and has good sealing performance with excellent open and close features. It is also pollution resistant.
  • It comes with special unloading loop and the liquid electrical switch protection circuit is assembled in the hydraulic system in order to make the machine run without any type of hassle.
  • Driven by automatic, manual and two times feeding technology, the electric control can easily adjust the operation mode and the feeding length to get the material pressing block suppression of varied material sizes and material.
  • The machine is run by micro-movement hopper on pressing device and solves the problem of discharge problem and ensures easy feed. It also reduces the abrasion of the discharging guard.
  • The hydraulic cylinder is driven by main pressure cylinder and fast forward cylinder is connected to form the composite cylinder, which improves the operating speed and reduces the energy consumption of the motor.

The machine adopts PLC control technology

  • The machine pressed metal block has high density, large diameter, non-breakable and good surface finish. It cannot be easily oxidized as well.
  • This machine is equipped with enclosed structure form and can recycle fluid in the metal chips, preventing oil leaking problem.
  • Metal scrap briquetter applicability:
  • Metal scrap briquetting press machine can compact various kind of chips such as aluminum, cast iron, magnesium, copper, titanium, etc. into high density blocks without any supplement, which makes it cost-effective.

Technical parameters:

Item 

Unit 

Y83A-160 

Y83-160 

Y83-230 

Y83-300 

Y83-800 

Y83-1000 

Nominal force 

KN 

1600 

1600 

2300 

3000 

8000 

10000 

Block size

Mm 

Φ90×

(60-85) 

Φ90×

(60-110) 

Φ110×

(70-120) 

Φ120×

(70-120) 

Φ180×

(165-180) 

Φ220×

(200-250) 

Block density 

Kg/m3 

≥5200-5400 

≥5200-5400 

≥5200-5400 

≥5200-5400 

≥5200-5400 

≥5200-5400 

Oil pressure

Mpa 

23 

16 

23 

21 

25 

25 

Out put

T/h 

0.6-0.9 

0.6-0.9 

1.0-1.5 

1.2-1.8 

6-7.5 

8.5-12 

Total power

Kw 

24.2 

24.2 

39.2 

47.2 

185 

225 

Weight

Kg 

4500 

6000 

7500 

8800 

50000 

60000 

Outside size 

Mm 

4900×1470

×1522 

4100×1086

×2006 

4100×1086

×2006 

5000×1600

×2600 

8000×6500

×2500 

9000×7500

×2500 



ANYANG FORGING PRESS MACHINERY INDUSTRY CO., LTD
X


Send Inquiry